To store the memory settings, do the following:
1. While the vehicle is in PARK (P), adjust
the driver’s seat, including the seatback
recliner, lumbar, and side wing area, and
both outside mirrors to your preference.
2. Press and hold the 1 or 2 button of the memory
control for three seconds. A double chime will
sound to let you know that the position has
been stored.
To repeat the procedure for a second driver,
follow the preceding steps, but press the other
numbered memory control button.
Each time button 1 or 2 is pressed and released
while the vehicle is in PARK (P), a single chime will
sound and the memory position will be recalled.
To stop recall movement of the memory seat
feature at any time, press one of the memory
buttons or power seat controls.
Easy Exit Seat
The controls for this memory function are located
on the driver’s door.
B(Easy Exit Seat): This button is used to
program and recall the desired driver’s seat
position when exiting or entering the vehicle. The
seat position can be saved for up to two drivers.
To store the seat exit position, do the following:
1. Press and release the 1 or 2 button. The seat
will move to the stored memory position.
2. Adjust the seat to the desired exit position.
3. Press and hold the exit button of the memory
control for three seconds. A double chime will
sound to let you know that the position has
been stored for the selected button 1 or 2.
To repeat the procedure for a second driver,
follow the preceding steps, but press the
other numbered memory control button.
11
To Next Page
Loading...
