6. Slide the license plate holder onto the spare
or flat tire. Secure it from the back of the tire
carrier with the wing nut.
If you choose not to reinstall the spare or flat
tire on the vehicle, you still need to reinstall
the license plate holder on the spare tire
carrier.
Storing the Jack and Tools
Follow these instructions to store the jack
and tools:
1. Lower the jack completely.
2. Place the jack in the mounting bracket.
3. Turn the hole at the top of the jack clockwise
until the jack is held tight in the mounting
bracket.
486
To Next Page
Loading...
Need help?
General
