Hunter Douglas EasyRise Installation Operation And Care

OPERATION
12
Operate the Shading
EasyRise
™
Shadings
To Lower the Shading and
Openthe Vanes
■ Pull the rear cord of the
cord loop down to lower
the shading.
■ With the shading fully
lowered, continue to pull the
rear cord to tilt the bottom rail
and open the vanes.
■ If the cord tensioner moves
up the cord, you have not
secured it to the wall or
window frame. You must do
so for the shading to operate
properly.
To Close the Vanes and Raise theShading
■ Pull the front cord of the cord loop down to close
the vanes and raise the shading.
■ If the cord tensioner moves up the cord, you have
not secured it to the wall or window frame. You
must do so for the shading to operate properly.
Important: If the shading raises or lowers
unevenly, the fabric rubs against one end of
the headrail, or the bottom rail is uneven when
fully raised, the bottom rail weight needs to be
adjusted. See “Adjusting the Bottom Rail Weight”
on page 17.
Front Side of Shading
To Lower and Open the Vanes of the Shading
Cord
Tensioner
and Bracket
Front Side of Shading
To Close Vanes and
Raise the Shading
Cord
Tensioner
and Bracket

Hunter Douglas EasyRise Specifications

General

Installation	Inside or Outside Mount
Safety	Cordless Design for Enhanced Child Safety
Suitable for	Residential and Commercial Use
Product Type	Roller Shades
Control Options	Cordless Loop
Material Options	Fabric