Hunter Douglas EasyRise User Manual

INSTALLATION
8
Install the Shade

Fit the front channel on top of the headrail onto the front
lip of the installation brackets.

Push the headrail up and back until it snaps into place.

Check to ensure the headrail is securely in the brackets.

Check that the bottom of the headrail is snapped into
the base of each bracket.

Check that the front lip of each bracket is in the front
channel of the headrail.

If any brackets are not installed correctly, release
the shade and reinstall. See “Removing the Shade, If
Necessary” on page13.
Good Bad
The back of the headrail
snaps into the bracket.
The front of the bracket
fits under the groove.
Headrail
Bracket
Snap
in Place

Hunter Douglas EasyRise Specifications

General

Installation	Inside or Outside Mount
Safety	Cordless Design for Enhanced Child Safety
Suitable for	Residential and Commercial Use
Product Type	Roller Shades
Control Options	Cordless Loop
Material Options	Fabric