!
Page 12
RC-024 Version 2.01
Configuring from the Hydrawise App or Website
Getting Started Wizard
To be able to configure your controller from the Hydrawise App or website you will need to connect your
controller to the internet and link the serial number of the controller to your account.
The controller does not need to be connected to the internet when you’re making your configuration
changes – if it isn’t connected at the time the changes are made the new configuration will be loaded once
the controller connects to the internet.
The Getting Started wizard is shown when you first create a new account or when you select Settings ->
Setup Wizard in the app.
1. If you have not already done so, create an account at the Hydrawise web site. Go to
http://hydrawise.com/try-now and register for an account.
2. Log into your account. If this is the first time that you have logged in you will be guided through a setup
wizard to help you with initial configuration of your controller.
Setting the Controller Model
The wizard will ask you to choose the model of your controller. You can search by SKU or simply select the
model from the list.
If you’re setting up a trial account, choose the closest model to the one you want – you can always change
it later.
Setting the Controller Name and Serial Number
The wizard will ask you to give your controller a name and also to enter the serial number. If you’re setting
up a test account and you don’t yet have a controller you can leave the serial number blank.
To Next Page
Loading...
