!
Page 57
RC-024 Version 2.01
Enter the name of the controller and the serial number if you know it, then click Create.
This will add the controller to the customer and you will see it in the list. You can click on it to see status
information and from here you can configure the controller. Note that your new controller will not appear on
the map until you have gone through the configuration wizard for the controller and entered an address for
it.
Managing Customer Plans
In the contractor portal, find your customer and click on their name to configure their details. You’ll see
what plans the customer has and when they’re going to expire.
To Next Page
Loading...
