Hunter Hydrawise Ready - Is Your Email Marked as Spam?; No Zones Running

!
Page 21
RC-024 Version 2.01
Initially there is no master valve configured.
Configuring Program Start Times
Your controller's watering Program Start Times specify when your controller is permitted to do any
watering. If multiple zones are using the same Program Start Time, then they will be started in sequence
(only one zone can run at a time).
To add a program start time, navigate to the Zones & Schedules page in your Hydrawise account and click
on Add Watering Time.
Start Time Enter the time for this Program Start Time.
Watering Type Choose the watering type for this Program Start Time. For example, choose odd or
even weeks.
Watering Days Choose which days this Program Start Time applies to. For example, choose odd or
even days, or select specific days of the week.