Hunter Hydrawise Ready - Page 47

!
Page 47
RC-024 Version 2.01
Customer’s Email
The email address that the customer will use to log into their account
Customer Name
The customer’s name
Type of User
If you want your customer to have full control over their system, select
“Can modify configuration and run zones
If you don’t want your customer to be able to change their configuration,
select “Can view configuration, manually run zones
Send Notifications To
Choose where to send emails about a controller being offline or plans
requiring renewal. This can be either your email address or your
customer’s email address
Send activation email to me
If you don’t want the customer to receive an account activation email
then tick this box and the activation email will be sent to your email
address instead.
Once you click Create you’ll be taken through a wizard to set up your customer’s controller and it will be
linked to your account. If you chose, you’ll receive the activation email, otherwise, it will be sent to the
customer.
Once their account is activated and they can log in and view their Dashboard, they will need to set a
password. Your new customer will now be visible in your list of customers in the Contractor portal.