HunterDouglas PowerView Manual

4.1. Open limit
4.1.1 Press and hold the manual control button .
4.1.2
Press the  open button.
Make sure

group1
on the remote is selected.
The blind will jog 1x
4.1.3 Release the manual control button .
The motor LED turns red to acknowledge the
motor is in program mode
4.1.4
Use the  open ,  stop and  close buttons to
move the blind about 20cm away from the stack
position.
MANUAL
Page 10 of 24 version: 1.1

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model