HunterDouglas PowerView Manual

3. Checking motor direction
3.1. Put motor in program mode
2.7
Press and hold the  stop button for 6 seconds.
The remote will exit programming mode
automatically after 20 seconds.
Keep pressing until the remote lights stop
blinking
IMPORTANT
Reversing motor direction is only possible with a fresh out of the box motor (no limits set) or when the end limits are
reset.
Before any limits are programmed, the motor direction has to be checked and reversed if needed.
If the open or close limit is already set, and the motor direction has to be reversed, perform a
reset
before continuing.

IMPORTANT
Watch out to perform steps 3.1.1 and 3.1.2 within 3 seconds!

3.1.1 Press and hold the manual control button .
MANUAL
Page 7 of 24 version: 1.1

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model