HunterDouglas PowerView Manual

5. Slat open position
The slat open position is automatically set, by selecting blind type in the
PowerView® Programmer software tool:
• Left stack Vertical blind (default)
• Right stack Vertical blind
• Split stack Vertical blind
4.2.10 The close limit is set!
Note
To re-position the close limit of the blind, repeat step
4.2. Close limit

IMPORTANT
Only
if the slat limit position is not satisfactory, follow below procedure to overwrite and reposition the slat open position.

5.1 Locate the manual control button on your blind.
MANUAL
Page 16 of 24 version: 1.1

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model