HunterDouglas PowerView Manual

2. Pairing a remote
A PowerView® remote can control up to 6 individual groups of blinds (buttons 1 to 6 at the top of the remote). The
instructions below assign a blind to group 1.
1.3.2 Release the manual control button after the
second jog. The Network ID and Group assignments
have been cleared.
The Network ID and Group assignments have been
cleared.
2.1 Locate the manual control button on your blind.
2.2
Press and hold the  stop button for 6 seconds.
Keep pressing until the remote lights start
blinking
MANUAL
Page 5 of 24 version: 1.1

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model