HunterDouglas PowerView Manual

4.1.8
Press the  open button.
The blind will jog 1x to acknowledge the limit
is set
4.1.9 Release the manual control button .
The motor LED turns off
4.1.10
Press and hold the  stop button for 6 seconds.
The remote will exit programming mode
automatically after 20 seconds.
Keep pressing until the remote lights stop
blinking
4.1.11 The open limit is set!
MANUAL
Page 12 of 24 version: 1.1

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model