HunterDouglas PowerView Manual

4.2.4
Use the  open ,  stop and  close buttons to
move the blind to the desired close position.
DO NOT let de blind hit the mechanical limit. Stop
the blind at its end position!
4.2.5
Press and hold the  stop button for 6 seconds.
DO NOT select a group on the remote!
Keep pressing until the remote lights start
blinking
IMPORTANT
Watch out to perform steps 4.2.6 and 4.2.7 within 3 seconds!

4.2.6 Press and hold the manual control button .
MANUAL
Page 14 of 24 version: 1.1

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model