HunterDouglas PowerView Manual

5.7
Press and hold the  stop button for 6 seconds.
DO NOT select a group on the remote!
Keep pressing until the remote lights start
blinking
IMPORTANT
Watch out to perform steps 5.8 and 5.9 within 3 seconds!

5.8 Press and hold the manual control button on your
blind.
5.9
Press the  arrow up button.
The blind will jog 1x to acknowledge the slat
open position is set
MANUAL
Page 19 of 24 version: 1.1

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model