To Next PageTo Next Page
Need help?Do you have a question about the HUSABERG FC 470 e and is the answer not in the manual?
General| Category | Enduro / offroad |
|---|---|
| Bore x Stroke | 95.0 x 66.0 mm (3.7 x 2.6 inches) |
| Compression Ratio | 11.7:1 |
| Ignition | Kokusan |
| Cooling System | Liquid |
| Transmission | 5-speed |
| Gearbox | 5-speed |
| Final Drive | Chain |
| Front Suspension | WP USD 48mm |
| Rear Suspension | WP monoshock |
| Front Brake | Single disc |
| Rear Brake | Single disc |
| Fuel Capacity | 8.50 litres (2.25 gallons) |
| Starter | Electric |
| Engine Type | Single cylinder, four-stroke |
| Fuel System | Carburettor |
| Dry Weight | 112 kg (246.9 pounds) |
| Engine | Single cylinder, four-stroke |
| Frame | Chromium molybdenum steel |
Ensures personal safety and motorcycle condition through proper apparel and maintenance.
Ensures safe transport of the motorcycle, preventing leaks and fire risks.
Advices on careful riding, knowing capabilities, and obeying regulations.
Recommends regular checks for safety and proper function before riding.
Details technical specifications for various motorcycle models.
Defines maintenance intervals for chassis components on FC, FSc, and FX models.
Specifies maintenance intervals for chassis parts on FE and FSe models.
Details regular and component-specific maintenance for FC, FSc, and FX engines.
Outlines regular and component-specific maintenance for FE and FSe engines.
Locates VIN, Engine Number, and explains steering lock usage.
Details ignition lock positions and relates to starting procedures.
Describes combination switches, clutch, decompression, throttle, and brake levers.
Covers dual ignition switch, instrument panel, and throttle adjustment.
Step-by-step guide for starting motorcycles with a kick starter.
Step-by-step guide for starting motorcycles with an electric starter.
Explains engine oil type, change intervals, and filter maintenance.
Details the CDI ignition system, spark plug checks, and ignition timing.
Covers cleaning, replacement, and oiling of the air filter for optimal performance.
Procedure for checking and adjusting valve clearances for engine performance.
Details carburetor inspection, adjustment, and setting for optimal performance.
Information on fuel type, fuel tank removal, and octane requirements.
Instructions for checking coolant level and mixture for the cooling system.
Covers clutch fluid level check, adjustments, and air bleeding procedures.
Explains the decompression system and adjustment of its cables.
Procedure for removing, inspecting, and assembling the front wheel.
Procedure for removing, inspecting, and assembling the rear wheel.
Detailed steps for removing and replacing wheel bearings and spacer sleeves.
Covers chain lubrication, sprocket inspection, and tension adjustment.
Details front brake fluid, pads, air bleeding, and lever adjustment.
Specific recommendations for Supermotard front brakes: run-in, inspection, cleaning.
Details rear brake fluid, pads, air bleeding, and lever adjustment.
Explains adjustment of rebound, compression damping, and oil change for front fork.
Details adjustment of compression, rebound damping, and static spring deflection.
Details adjustment of compression, rebound damping, and static spring deflection for Supermotard.
Procedure for checking and adjusting steering head bearing clearance.
Covers swingarm bearing and bushing checks, cleaning, lubrication, and removal.
Electrical schematic for FE/FS models with electric start, excluding turn signals.
Electrical schematic for FE/FS models with electric start and turn signals.
Electrical schematic for FC/FX models with electric start.
Electrical schematic for FC/FS models with kick-starter.
