3 HUSKYTOOLS.com
Please contact 1-888-HD-HUSKY for further assistance.
POWER ON
1. Verify torque is not being applied to the wrench. Press “ ” for 2 seconds. Wrench will beep once.
2. The wrench will default to Peak Torque Mode. The last unit of measurement and last torque setting will display.
3. The wrench is ready to use.
POWER OFF
1. If no torque is applied, wrench will shut off automatically after 90 seconds.
2. To shut off manually, verify torque is not being applied then press “ ” for 3 seconds.
Select Unit of
Measurement
Value (+) Change ModeAudible
Alert
• On/Off
• Clear
• Exit Current
Setting
Value (-) • Change Torque
or Angle Value
Setting
• Select Option
Displayed
• Select Torque
or Angle Value
• Color LCD
Screen
POWER (ON/OFF)
To Next Page
Loading...
