4 Operation
4.1 Main switch
WARNING: Read the safety
instructions carefully before you start
the product.
WARNING: Keep your hands and feet
away from the rotating blades. Do not
put your hands or feet near to or below
the product when the blade motor is
on.
WARNING: Do not use the product
when persons, especially children, or
animals are in the work area.
• Set the Main switch in the
1
position to start
the product.
• Set the Main switch in the
0
position when
the product is not in use or before you do
inspection or maintenance on the product.
4.2 To start the product
1. Press the STOP button to open the hatch.
2. Set the main switch to position
1
.
3. Enter the PIN code.
4. Push the START button.
5. Close the hatch.
Note:
If the product is parked in the charging
station, the product will only leave the charging
station when the battery is fully charged and if the
timer allows the product to operate.
Note: Press the START button before closing the
hatch to start the product. If the START button is
not pressed, a message beep is heard and the
product will not start.
4.3 Operating modes
Push the Operation selection button to select the
following operating modes:
•
Home
•
Auto
•
Man
4.3.1 Home mode
Operating mode
Home
means that the product
remains in the charging station until a different
operating mode is selected. The
Home
mode is
also used to test if the product can follow the
guide wire and dock with the charging station.
4.3.2 Auto mode
The
Auto
mode is the standard operating mode
where the product mows and charges
automatically.
4.3.3 Manual mode
To mow secondary areas the operating mode
Man
must be chosen. In the
Man
mode, the
operator must move the product manually
between the main area and the secondary area.
The product mows until the battery is empty.
When the battery is empty, the product stops and
the message
Needs manual charging
shows in
the product display. Put the product in the
28
- Operation
1285 - 004 - 16.04.2020
To Next Page
Loading...
