Husqvarna Automower 115H - User Manual

48 pages

Save Page as PDF

To Next Page

Husqvarna

: Automower

115H

GARDENA

: SILENO city, smart SILENO city,

SILENO life, smart SILENO life

McCULLOCH

: ROB S400, ROB S500,

ROB S600

Flymo

: EasiLife 200, EasiLife 350, EasiLife 500

Workshop manual

Main Page

Questions and Answers

B
brownchristopherNov 3, 2025
What to do if my Husqvarna Lawn Mower goes outside the working area?
- K
  kimberlytaylorNov 3, 2025
  If your Husqvarna Lawn Mower is going outside of the designated working area, there are several potential causes: * Incorrect boundary wire connections: Ensure the left and right sections of the boundary wire are correctly connected to the left and right connections in the charging station. * Excessive slope at the boundary wire: Verify the boundary wire is installed according to the instructions. * Incorrect island installation: Check that the boundary wire around any islands is installed as instructed, with the two sections of wire to and from the island placed close together. * Signal interference: Place the mower in the charging station and generate a new loop signal. * Metal object interference: Relocate the boundary wire and/or create islands in the work area to boost sign...
C
Cassandra SchmidtNov 18, 2025
Why does my Husqvarna Lawn Mower go outside the working area?
- S
  Sheila GarciaNov 18, 2025
  Your Husqvarna Lawn Mower might be operating outside the designated working area due to several reasons. The boundary wire connections to the charging station may not be correctly installed; make sure to examine that the left and right sections of the boundary wire are correctly installed to the left and right connections in the charging station. The work area may slope too much at the boundary wire; examine the installation of the boundary wire is installed according to the instructions. The boundary wire around an island may not be installed correctly, or the boundary wires are crossed; examine that the boundary wire around the island is installed according to the instructions and put the two sections of boundary wire to and from the island close together. The product may find it hard to...

Summary

Introduction

Document Description

Explains manual structure, conventions, and notation for clarity.

Servicing Tools

Emphasizes using manufacturer-recommended tools for proper maintenance and repair.

Safety Guidelines

General Safety Instructions

Provides essential safety precautions for operating and maintaining the lawn mower.

Special Safety Instructions

Details specific safety measures for maintenance, thunderstorms, and battery handling.

Product and Installation

Main Components and Loop System

Details core components, boundary/guide loop signals, and charging station LED indicator.

Charging Station and Sensors

Covers charging station placement, sensor types, and installation testing.

Advanced Installation Features

Explains slope operation, SensorControl/LawnSense, and loop signal adjustments.

Special Menus

Tools Menu Overview

Visual guide to the Tools menu structure, including overview and expert mode.

Tools - Info and History Data

Covers detailed info on battery, loop, sensors, motors, and history logs.

Tools - Testing and Calibration

Details component testing procedures and calibration methods.

Quick Info Menu Access

Provides access to a limited set of Tools menu functions for rapid checks.

Autocheck Service Tool

Installation, Connection, and Basic Usage

Guides on software installation, product connection, and basic Autocheck operation.

Autocheck Functions and Diagnostics

Details auto/manual tests, firmware updates, actions, logs, and documents.

Circuit Board Programming and PIN Retrieval

Covers programming circuit boards and retrieving a forgotten PIN code.

Repair Instructions

Body and Chassis Disassembly

Step-by-step guide for disassembling the product's body and chassis components.

Upper Chassis and Circuit Board Details

Details disassembling the upper chassis and identifying product circuit boards.

Component Replacement Procedures

Details replacing sensor boards, main board, rear module, HMI, and communication boards.

Battery, Filter, and Module Maintenance

Covers battery system, ventilation filter, charging plates, keypad, suspension, and cutting module.

Wheel Motors and Assembly Steps

Explains wheel motor replacement and reassembling the upper chassis and body.

Sealing Strips and Charging Tower

Details replacing chassis sealing strips and the charging station tower.

Screw Mounting and Thread Repair

Provides guidance on mounting screws in plastic and repairing stripped threads.

Service

Service Schedule Checklist

Outlines periodic maintenance tasks and recommended service actions for the product.

Screw Fastener Specifications

Lists specific screws, hardware, tools, and torque values required for assembly.

Troubleshooting

Error Message Reference

Lists product error messages, their likely causes, and recommended troubleshooting actions.

Symptom Analysis and Solutions

Describes common symptoms during operation and provides solutions.

Loop Signal and Battery Diagnostics

Guides on diagnosing loop signal issues and performing battery performance tests.

Transportation, Storage, and Disposal

Cleaning, Storage, and Environmental Handling

Covers safe cleaning, winter storage, and proper disposal and recycling procedures.

Technical Data

Technical Data Reference

Directs users to the Operator's manual and manufacturer's website for detailed technical specifications.

Husqvarna Automower 115H Specifications

General

Cutting Width	8.7 in
Cutting Height Min	2 in
Cutting Height Max	3.6 in
Battery Type	Li-Ion
Typical Charging Time	60 min
Area Capacity	0.4 acre
Battery Capacity	2.0 Ah
Weather Resistance	Yes
Typical Mowing Time per Charge	60 min
Blade Type	3 pivoting blades
Weight	9.3 kg