10 - English
2. PRESENTATION
2. Presentation
This chapter contains information you should be aware
of when planning the installation.
An installation of Husqvarna Automower™ comprises
three main components:
Automower, an automatic lawn mower that mows the
lawn by moving in an irregular pattern. The mower is
powered by a maintenance-free battery.
Loop generator/charger.
The loop generator/charger has two functions:
• To send control signals along the boundary wire.
• To charge the battery in Automower.
The loop generator/charger is connected to a 120 V
wall socket via an integrated power cord and to the
mower via a 6 ft long low voltage cable.
Wire, laid in a loop around Automower’s working
area. The boundary wire is laid around the edges of
the lawn and around objects and plants that the
mower must not run into.
The wire supplied with the installation is 500 ft long. If
this is not sufficient more wire can be purchased, with
a connector, and spliced onto the existing wire.
3012-751
3012-752
3012-221
To Next Page
Loading...
Need help?
General
