Fastener Hardware Tool Tightening
torque (Nm)
Bearing cover, skid plate Screw gray, 4 x 14 mm Torx 20 1.2
Cutting motor to lower chassis Screw, 5 x 16 mm Torx 20 1.8
Clamp for battery, weight and rear loop
sensor circuit board.
Screw, 5 x 16 mm Torx 20 1.8
Charging station, lid Screw gray, 4 x 14 mm Torx 20 0.8
Charging station, frame Screw gray, 4 x 14 mm Torx 20 1.2
Charging station, contact strips Screw gray, 4 x 14 mm Torx 20 0.8
Charging station, base and housing Screw gray, 4 x 14 mm Torx 20 1.2
38 - Service 1582 - 001 - 23.12.2020
To Next Page
Loading...
