Husqvarna FE 250 User Manual

SERVICE WORK ON THE ENGINE 18
129
18.4 Adding engine oil
Info
Too little engine oil or poor-quality engine oil will result in premature wear of the engine.
S03570-10
Main work
–
Remove filler plug
1
with the O-ring.
–
Fill engine oil to the middle
A
of the level viewer.
Engine oil (SAE 10W/50) ( p. 145)
Info
For optimal performance of the engine oil, do not mix
different types of engine oil.
We recommended changing the engine oil when nec-
essary.
– Mount and tighten the filler plug together with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and
inhaling them may result in unconsciousness and
death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use effective exhaust extraction when starting or
running the engine in an enclosed space.
– Start the engine and check for tightness.
Finishing work
– Check the engine oil level. ( p. 126)

Husqvarna FE 250 Specifications

General

Engine Type	Single cylinder, 4-stroke
Bore x Stroke	78 mm x 52.3 mm
Starter	Electric starter
Transmission	6-speed
Cooling	Liquid cooled
Front Suspension	WP XPLOR-USD, Ø 48 mm
Rear Suspension	WP XACT Monoshock with linkage
Front Brake	Disc brake, 260 mm
Rear Brake	Disc brake, 220 mm
Ground Clearance	370 mm
Seat Height	950 mm
Displacement	249.9 cc
Fuel System	Keihin EFI
Frame	chrome molybdenum steel
Fuel Tank Capacity	8.5 L