MAINTENANCE
22 – English
Functional inspection
General inspection
• Check that the cord and extension cord are intact and
in good condition. Never use the machine if the cord
is damaged, hand it in to an authorized service
workshop for repair.
• Check that nuts and screws are tight.
Bar
Check regularly:
• Whether there are burrs on the edges of the bar.
Remove these with a file if necessary.
• Whether the groove in the bar has become badly
worn. Replace the bar if necessary.
• Whether the tip of the bar is uneven or badly worn. If
a hollow forms on the underside of the bar tip this is
due to running with a slack chain.
• To prolong the life of the bar you should turn it over
when changing the diamond chain.
Splineway / Rim sprocket
• Check the splineway and rim sprocket for wear.
!
WARNING! Never use damaged cables.
They can cause serious, even fatal,
personal injuries.
To Next Page
Loading...
