Husqvarna K6500 II Chain - Equipment; Technical Data; Recommended Cutting Equipment Specification

24 – English
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) conforming to EN 60745-1.
Note 2: Noise pressure level according to EN 60745-2-13. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 2,0 dB(A).
Note 3: Vibration level, according to EN 60745-2-22. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1,0 m/s
2
.
Recommended cutting equipment specification
Splineway combinations for different cutting equipment
K6500 II Chain
Motor
Electric motor HF High Frequency
Max. speed of output shaft, rpm 8800
3-phase operation, Motor output - max. kW 5,5
1-phase operation, Motor output - max. kW 3
Weight
Machine with cable package, without cutting equipment, kg/Ibs 9,1/20,0
Water cooling
Water cooling of electric motor Ye s
Water cooling of cutting equipment Ye s
Recommended water pressure, bar/PSI 1,5-6 / 21,8-87
Min. recommended water flow, litres/min / gal(US)/min 4,5 at water temperature 15°C
Connecting nipple Type ”Gardena”
Noise emissions (see note 1)
Sound power level, measured dB(A) 110
Sound power level, guaranteed dB(A) 112
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A) 99
Vibration levels, a
hv
(see note 3)
Front handle, m/s
2
2,7
Rear handle, m/s
2
2,1
Guide bar and
diamond chain
Number of
diamond chain
segments:
Diamond chain
segment width,
mm/inch:
Diamond chain
pitch, mm/inch:
Max cutting
depth, mm/inch
Chain speed at
max. engine power
speed, m/s / ft/s
12” (0,444”) 25 5,7/0,22 11,582/0,444 350/14 26/85
14” (3/8”) 32 5,7/0,22 9,525 / 3/8 400/16 24/79
16” (0,444”) 29 5,7/0,22 11,582/0,444 450/18 26/85
Splineway Rim sprocket Guide bar Diamond chain
Supplied with K6500 Chain Purchased separately
7 splines 0,444” 0,444” 0,444”
9 splines 3/8" 3/8" 3/8"