Husqvarna LC 551 iV - 6.9.5 Remove Battery Box

6.9.5 To remove the battery box
1. Refer to
To remove the power unit from the chassis
on page 23 , To remove the cover from the power
unit on page 25 and To remove the battery control
box on page 27 .
2. Remove the 4 screws and remove the battery box.
6.9.6 To remove the key switch
1. Refer to To remove the power unit from the chassis
on page 23 , To remove the cover from the power
unit on page 25 and To remove the battery box on
page 28 .
2. Turn the battery box with the top down.
3. Remove the 3 screws and remove the bracket (A).
A
4. Remove the 7 screws. Remove the key switch (B). If
it is necessary, replace the key switch.
B
D
C
5. Remove the brackets (C) and (D) and the cables
that are attached to them. If it is necessary, replace
the brackets.
28 - Repair instructions 1292 - 001 -