English – 23
1
Release the battery’s fixing belt. Remove the safety
guard.
3
4
Remove the clamps which hold the throttle and
choke wires. Unhook the wires from their
attachment in the carburettor.
2
Remove the cable which runs between the starter
relay and starter motor from the starter motor.
Mark up and remove the engine’s electrical
connections.
Release the battery cable connections. Now lift out
the battery.
IMPORTANT INFORMATION
Brace the screws for the battery cables to
avoid exposing the terminals to stress.
Remove the engine hood on Pro 18. On Rider 15 it
can be left on.
Reparation instructions
Removing engine
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
