Hyd-Mech S-23 - Gearbox Lubrication S23; Gearbox Lubrication S20 with Vfd Option

3.6
GEARBOX LUBRICATION S20 with VFD Option
7KH%RQ¿JOLROL:JHDUER[XVHGRQWKH6LVVXSSOLHGZLWKOLWUHV86JDOORQVRI6KHOO7LYHOOD
S320 synthetic oil. This oil has an ISO Viscosity Grade of 320 that is optimum for ambient temperatures
from 20-70 Deg C (70-140 Deg F). The W86 was designed to be a sealed unit, so no oil change should be
QHFHVVDU\+RZHYHULIWKHRLOQHHGVWREHFKDQJHG%RQ¿JOLROLUHFRPPHQGVWKDWVKRXOGDOXEULFDQWRWKHUWKDQ
the approved Shell type be used, this be equivelent viscosity wise and of the synthetic type. The lubricant must
also have the necessary EP and anti-foaming additives.
GEARBOX LUBRICATION S23
7KH%RQ¿JOLROL:JHDUER[XVHGRQWKH6LVVXSSOLHGZLWKOLWUHV86JDOORQVRI6KHOO7LYHOOD6
synthetic oil. This oil has an ISO Viscosity Grade of 320 that is optimum for ambient temperatures from 20-70
'HJ&'HJ)%RQ¿JOLROLUHFRPPHQGVWKDWVKRXOGDOXEULFDQWRWKHUWKDQWKHDSSURYHG6KHOOW\SHEH
used, this be equivelent viscosity wise and of the synthetic type. The lubricant must also have the necessary
EP and anti-foaming additives.
Subsequent oil changes should be made every 600 to 12000 hours of operation depending on load conditions.
The intervals, however, should not exceed 4 years.