Hyd-Mech S20 SERIES III User Manual

1
Thank you,
On behalf of everyone at HYD·MECH Group Limited, I would like to thank and congratulate you on your decision to pur-
chase a HYD·MECH bandsaw.
Your new machine is now ready to play a key role in increasing the efciency of your operation, helping you to reduce cost
while boosting quality and productivity.
To ensure you are maximizing the power and versatility of your new HYD·MECH bandsaw, please take the time to famil-
iarize yourself and your employees with the correct operation and maintenance procedures as outlined in this manual.
We sincerely appreciate the condence you have demonstrated in purchasing our product and look forward to building a
long and mutually benecial relationship.
Thank you
Hyd·Mech Group Limited
P.O. Box 1030, 1079 Parkinson Road
Woodstock, Ontario, N4S 8A4
Phone : (519) 539-6341
Service : 1-877-237-0914
Sales : 1-877-276-SAWS (7297)
Fax : (519) 539-5126
e-mail : info@hydmech.com
S20 SERIES III
393289
REV B

Hyd-Mech S20 SERIES III Specifications

General

Brand	Hyd-Mech
Model	S20 SERIES III
Category	Saw
Language	English

Summary

Safety Instructions

Basic Safety Rules

Guidelines for safe machine operation and use, including working order and safety equipment.

Owner Responsibilities

Owner's duties for manual accessibility, personnel training, and maintaining machine/workplace conditions.

Operator and Maintenance Personnel Responsibilities

Operator/maintenance duties for safety equipment checks, safe operation, and PPE usage.

Installation

Foundation, Levelling, and Anchoring

Electrical Wiring Connections

Operating Instructions

Operator Control Panel Overview

Introduction to the machine's control panel and its primary functions.

Operator Panel Control Details

Detailed functions of switches, dials, and displays on the control panel.

Head Swing and Angle Brake

Blade Operation Basics

Fundamentals of blade break-in, coolant use, clamping, and speed selection.

Optimum Blade Pitch Selection

Maintenance and Troubleshooting

Blade Replacement Procedure

Step-by-step guide for safely removing and installing a new bandsaw blade.

Blade Tracking Alignment

Instructions for adjusting blade tracking on idler and drive wheels.

Blade Guide Block Adjustment

Blade Squareness Adjustment

Troubleshooting Guide

A guide to identifying and resolving common problems with the bandsaw.

Specifications

S20 Series III Specification List

Detailed technical specifications for the S20 Series III bandsaw, including capacity and dimensions.