ContaminationSensor CS General Safety Precautions
HYDAC Filtertechnik GmbH
en
Page 11
BeWa CS1000 3247149k en.doc 2004-07-12
1.8 Training and Instruction of Personnel
• The CS may only be operated by properly trained and instructed personnel.
• The areas of responsibility of your staff must be established in a clear-cut manner.
• Staff undergoing training may not use the CS unless supervised by an experienced
staff member.
Individuals
Activity
Individuals
undergoing
training
Individuals with
technical
training/
engineering
background
Electrician Supervisor
with the
appropriate
authority
Packing
Transportation
X X
X
Commissioning
X X X
Operation
X X X X
Troubleshooting/
locating the
source of
malfunction
X X X
Remedying of
mechanical faults
X
X
Remedying of
electrical faults
X X
Maintenance and
servicing
X X X X
Repair work
X
Shutdown/
decommissioning
Storage
X X X X
1.9 Safety Measures to Be Followed in Normal Operation
• Do not operate the CS unless all the safety devices function properly.
• The product is to be checked once a day for external damage and the proper functioning
of the safety devices.
1.10 Electrical Hazards
• Any work involving the power supply may only be done by a properly trained, certified
electrician.
• Make sure to check the electrical equipment of the product on a regular basis. Any loose
connections or damaged cables are to be remedied/replaced immediately.
To Next Page
Loading...
Need help?
General
