8.5 Hydraulic Tank
The hydraulic tank has the following features:
• Sight gauge and thermometer for seeing the oil level and its temperature
• Filler/breather cap to keep the contents of the tank free of airborne contamination
• Level sensor with temperature switches which monitor the tank for low level and high temperatur
e
a
larm conditions
• Inlet suction strainers to prevent contamination from reaching the main PCVD pump and the gear
pump or kidney loop system.
8.6 Main Pump Setup
Contact Hypertherm if the main hydraulic pump needs to be replaced. Detailed setup information is
available upon request.
55
To Next Page
Loading...
