Hypertherm HyPrecision 100D - 9 Specifications; Pump Requirements

9 Specifications
The following specifications describe the requirements and capabilities of the AS-Series pumps.
9.1 Pump Requirements
50hp
(37kW)
60hp
(45kW)
75hp
(56kW)
100hp
(75kW)
150hp
(112kW)
Frequency (Hz) 50 60 50 60 50 60 50 60 50 60
Pump Power
Voltage (V)
400
230/460
230
/460
400 460 400 460 400 460
Current (I)
70 135/67 105 95 150 120 215 170
Main C.B. Rating (I)
90
175/100
125 125 175 150 250 200
Physical
Size
Width
80in (2.03m) 45 (1.15m)
Length
42in (1.07m) 86 (2.18m)
Height
58in (1.47m) 56 (1.42m)
Clearance Height
80in (2.03m) 80in (2.03m) 80in (2.03m)
Shipping Weight
Approx.
(in crate, no oil)
3200lb
(1450kg)
3300lb (1497kg) 3400lb (1540kg) 4250lb (1928kg) 6250lb (2834kg)
Operating Weight
Approx.
3100lb
(1406kg)
3200lb (1450kg) 3300lb (1497kg)
3300lb (1497kg)
4150lb (1882kg)
6100lb
(2767kg)
Ambient Conditions
Min. Storage Temp.
(not drained)
35°F (1.7°C)
Min. Operating
Temp.
40°F (4.4°C)
Max. Operating
Temp.
95°F (35°C)
Note: higher temperature operation available with additional cooling package
Max. Relative
Humidity
95%
Inlet Cutting Water
Min. Inlet
Water Pressure
40 psi (1.38 bar)
57