Hypertherm Powermax 85 Field Service Bulletin

© 2013 Hypertherm, Inc.
All Rights Reserved
Tous droits réservés
Hypertherm, Phoenix, and EDGE are trademarks of Hypertherm, Inc. and may be registered in the United States and/or other countries.
Hypertherm, Phoenix et EDGE sont des marques d’Hypertherm, Inc. qui peuvent être déposées aux États-Unis et/ou dans d’autres pays.
Hypertherm, Inc.
Hanover, NH 03755 USA
603-643-3441 Tel
Hypertherm Europe B.V.
4704 SE Roosendaal, Nederland
31 165 596907 Tel
Hypertherm (Shanghai)
TradingCo., Ltd.
PR China 200052
86-21 5258 3330 /1 Tel
Hypertherm (S) Pte Ltd.
Singapore 349567
65 6 841 2489 Tel
Hypertherm (India) Thermal
Cutting Pvt. Ltd.
Chennai, Tamil Nadu
91 0 44 2834 5361 Tel
Hypertherm Brasil Ltda.
Guarulhos, SP - Brasil
55 11 2409 2636 Tel
Hypertherm México, S.A. de C.V.
México, D.F.
52 55 5681 8109 Tel
www.hypertherm.com

Hypertherm Powermax 85 Specifications

General

Gas Supply	Clean, dry, oil-free air or nitrogen
Cooling Method	Fan-cooled
Input Voltage	200-600V, 3-phase
Current Output	25-85 A
Duty Cycle	60% @ 85 A
Recommended Gas Inlet Flow Rate/Pressure	6.7 scfm @ 85 psi
Cutting Capacity (Recommended)	1" (25 mm)
Gas Type	Air/Nitrogen