Hypertherm powermax65 Field Service Bulletin

Machine Interface Receptacle with Voltage Divider PCB
6 806980 Field Service Bulletin Powermax65/85/105/125, Powermax65/85/105 SYNC
4. Remove the component barrier from the power-PCB side of the plasma power supply.
Remove the end panel bracket
Remove the end panel bracket . Some models have
2 screws on the end panel bracket that you must first
remove.
1
2 2
1
2

Hypertherm powermax65 Specifications

General

Brand	Hypertherm
Model	powermax65
Category	Welding System
Language	English