Hypertherm T45v - Introduction to T45 v Torch Lead Replacement; Purpose of Torch Lead Replacement; Tools and Materials Needed for Replacement; Torch Lead Kit Contents

T45V TORCH LEAD REPLACEMENT
Field Service Bulletin 1
Introduction
Purpose
Describes the necessary steps to replace the torch lead on the T45v hand torch.
Tools and materials needed
T10 Torx driver (preferred) or flat-blade screwdriver
5/16” (8mm) wrench
1/2” wrench or adjustable wrench
#1 and #2 Phillips-head screwdrivers
Kit contents
Kit 228315
Part number Description Quantity
229137 Lead: T45v hand torch, 20 feet (6.1 m) 1
075504 Machine screw: 4-40 x 5/16 SW CN SEM PH PAN 1
075503 Locknut: 4-40 Flexloc 1
Kit contents
Kit 228316
Part number Description Quantity
229138 Lead: T45v hand torch, 50 feet (15.24 m) 1
075504 Machine screw: 4-40 x 5/16 SW CN SEM PH PAN 1
075503 Locknut: 4-40 Flexloc 1
Kit contents
Kit 228545
Part number Description Quantity
229346 Lead: T45v hand torch, 27 feet (8.0 m) 1
075504 Machine screw: 4-40 x 5/16 SW CN SEM PH PAN 1
075503 Locknut: 4-40 Flexloc 1
DANGER
ELECTRIC SHOCK CAN KILL
Disconnect electrical power before performing any maintenance.
See Section 1 of the Operator Manual for more safety precautions.