Hypertherm T45v User Manual

T45v Torch Lead Replacement
Remplacement du faisceau de la
torche T45v
Field Service Bulletin
Bulletin de service sur le terrain
806000 – Revision 1 – September, 2010
Révision 1 – Septembre, 2010

Hypertherm T45v Specifications

General

Torch Length	7.6 m (25')
Input Voltage	400 V
Open Circuit Voltage (OCV)	300 V
Weight	14.5 kg (32 lb)
Recommended Gas Inlet Pressure	5.5 bar (80 psi)
Gas Type	Air or Nitrogen
Cooling Method	Air-cooled

Summary

Introduction to T45v Torch Lead Replacement

Purpose of Torch Lead Replacement

Details the necessary steps to replace the torch lead on the T45v hand torch.

Tools and Materials Needed for Replacement

Lists essential tools and materials required for the torch lead replacement procedure.

Torch Lead Kit Contents

Specifies the parts included in different kit numbers for torch lead replacement.

Disassembling the Torch Handle and Lead

Steps to Disassemble Torch Handle

Provides detailed steps for removing the torch handle and separating it from the lead.

Attaching Torch Body to New Lead

Guides on connecting the torch body components to the new torch lead.

Reassembling the Torch Handle

Steps for Reassembling Torch Handle

Details the process of putting the torch handle back together after lead replacement.

Final Checks After Reassembly

Ensures proper function of the plunger and trigger after reassembly.