6 © Copyright 2019 HYPERVSN. All rights reserved
Note. The dome is an optional accessory component (Picture 4). It is designed to prevent possible damage to
the Device and to provide safety to viewers. This is particularly important in situations, where the Device will
be mounted lower than specified in the precautions. The dome is supplied on customer request at additional
cost.
Picture 4. Device with the dome installed
Note. The sockets at the bottom of the stator are intended to provide connection with HYPERVSN MasterBox.
For more detailed information, see the Operating manuals for HYPERVSN MasterBox and HYPERVSN Wall.
Picture 5. Sockets at the bottom of the stator
To Next Page
Loading...