Hysolis Apollo 5K - User Manual

Questions and Answers

C
Colton PerezAug 15, 2025
What to do if Hysolis Apollo 5K Power Supply has no response after powered on?
- G
  Gary ConnerAug 15, 2025
  If your Hysolis Power Supply doesn't respond after being powered on, it could be due to: 1. The battery voltage being far too low, triggering BMS protection. Check the battery polarity connection. 2. Reversed battery polarity. Recharge the battery. 3. The battery needs replacing. Replace the battery.
B
brenda52Aug 21, 2025
Why AC input doesn't charge the Hysolis Power Supply battery?
- A
  atkinsmichaelAug 21, 2025
  If the AC input isn't charging your Hysolis Power Supply battery, it might be because: 1. The unit is in Energy Saver mode. Turn off the Energy Saver mode. 2. The unit is in Battery First mode. Switch the working mode.
M
mcconnelldanielAug 29, 2025
What to do if DC input doesn't charge Hysolis Power Supply battery?
- J
  James HardinAug 30, 2025
  If the DC input isn't charging the Hysolis Power Supply battery, it could be due to: the battery being already full or the DC input voltage being too low. Use the proper DC Input voltage.
K
Kevin BarberNov 6, 2025
What to do if Hysolis Apollo 5K buzzer beeps continuously?
- X
  xcalhounNov 6, 2025
  A continuous beeping sound from the buzzer of your Hysolis Power Supply indicates several potential issues: * E07: Overload error. The AC output is 110%+ overloaded. Suggested solution: Reduce the loads. * E05: AC output short circuit. Suggested solution: Check the output wiring and remove any abnormal loads. * E02: Inverter components temperature over 100º C. Suggested solution: Check the cooling fan and ventilation. * E03: Battery over-voltage (over charged). Suggested solution: Contact technical support. * E06/22: Abnormal AC out-put voltage (Too high or too low). Suggested solution: Reduce the loads power and/or contact technical support. * E13: Over-current or surge. Suggested solution: Restart the unit and contact technical support if it happens again. * E08/09: Intern...

Summary

1.0 Introduction

2.0 Safety

3.0 Initial Inspection

4.0 Product Features

4.1 Top Panel

Details the top panel components and features, including the wireless charger.

4.2 Front Panel

Details the front panel ports, buttons, and indicators like USB, AC outlets, and touchscreen.

4.3 Back Panel

Details the back panel ports, switches, and indicators like AC/DC input, expansion ports, and ground port.

4.4 Homepage UI Touchscreen

Explains the functions of the main touchscreen interface elements and navigation buttons.

4.5 Homescreen UI Icons

Describes the meaning and function of various icons displayed on the homescreen.

5.0 Installation

5.1 Overview

Outlines the two installation options: Single Unit setup and Multi-unit setup.

5.2 General Installation Guidelines

Provides essential guidelines for safe and effective installation, including ventilation and environment.

5.3 Single Unit Options

Details input/output capabilities and parameters for a single unit setup.

5.4 Multi-unit Setup

Provides wiring diagrams and configurations for connecting multiple Apollo 5K units.

6.0 Operation

6.1 Power-on Options

Guides on powering the unit on using battery, AC, or PV sources, and how to power it off.

6.2 Touchscreens

Details usage of Home, Settings, Information, and Alerts touchscreens for unit control and monitoring.

7.0 Product Care

8.0 Troubleshooting

8.1 Alerts Touchscreen

Describes how to view current and historical alerts and error codes on the unit.

9.0 Technical Specifications

10.0 Declarations

Hysolis Apollo 5K Specifications

General

Rated Power	5000W
Capacity	4.8kWh
Output Power	5000W
Output Voltage	120V/240V
Battery Type	Lithium Iron Phosphate (LiFePO4)
Warranty	5 years
Operating Temperature	-10°C to 50°C
Cycle Life	6000 cycles to 80% DoD