Hytera HR106X - Rear Panel - Advanced Version

4
2.2.2 Advanced Version
No. Part Name No. Part Name
1 TX Antenna Connector
7 USB Connector
2 Monitor/Tuning Interface 8 DC Power Inlet
3 Accessory Connector
9 AC Power Inlet
4 RX Antenna Connector
10 AC Power Switch
5 Ethernet Interface 1 11 Ground Screw
6 Ethernet Interface 2 / /
In routing mode, the Ethernet interface 1 and Ethernet interface 2 must serve as LAN port and WAN port
respectively.