Hytera HR106X - Status Indicators; Network Interface Status; Power Supply Status

10
Indicator Description Repeater Status

Digital mode: The repeater is transmitting on timeslot A.
Timeslot A RX Green

Analog mode: The repeater is receiving.

Digital mode: The repeater is receiving on timeslot A.
Timeslot B TX Red Digital mode: The repeater is transmitting on timeslot B.
Timeslot B RX Green Digital mode: The repeater is receiving on timeslot B.
4.4.2 Network Interface
Indicator Description Repeater Status
Ethernet Interface
LED 1 Flashing The network interface card is transmitting data.
LED 2
Glowing The data transmission rate is 1000 Mbps/100 Mbps.
Off The data transmission rate is 10 Mbps.
4.4.3 Power Supply
Indicator Description Repeater Status
Power Supply
(Visible through the Air Inlet for
Power Supply)
Yellow The repeater is supplied by an AC power.
Blue The repeater is supplied by a DC power.
Red The repeater cannot be turned on.