Hytera HR106X - Care and Cleaning; Product Care; Product Cleaning

18
7. Care and Cleaning
To guarantee optimum performance as well as a long service life of the product, please follow the tips below.
7.1 Product Care

Keep the product at a place of good ventilation and heat dissipation to facilitate normal work.

Do not place irrelevant articles on top of the product to ensure optimal heat dissipation.

Do not pierce or scrape the product.

Keep the product away from substances that can corrode the circuitry.

Do not place the product in corrosive agents, solutions or water.
7.2 Product Cleaning
Turn off the product before cleaning.

Clean up the dust and fine particles on the product surface with a clean and dry lint-free cloth or a brush regularly.

Use neutral cleanser and a non-woven fabric with neutral cleanser to clean the keys, knobs, display, and
connectors after long-time use. Do not use chemical preparations such as stain removers, alcohol, sprays or oil
preparations, so as to avoid surface case damage.

Make sure the product is completely dry before use.