Hytera HR65X - Basic Operation; Turning on or off the Repeater; Switching the Channel; Adjusting the Volume

User Guide
Basic Operation
9
5. Basic Operation
5.1 Turning On or Off the Repeater
 Automatically Turn On
When connected to external power supply, the repeater automatically turns on.

Manually Turn On or Off
When connected to external power supply, long press the
On-Off
key to turn on or off the repeater.
5.2 Switching the Channel
In the standby mode, press the
Volume/Channel Up
key or the
Volume/Channel Down
key.
The seven-segment LED displays the current channel number.
5.3 Adjusting the Volume
To switch the Volume/Channel Up key to the volume mode, press the key for five seconds.
If you do not have any operation or you long press the
Volume/Channel Up
key within five seconds, the key
will switch to the channel mode.
Press the Volume/Channel Up key to increase or the Volume/Channel Down key to decrease the volume.
5.4 (Optional) Transmitting
Connect the remote speaker microphone (RSM) to the repeater.
Press the push-to-talk (PTT) key on the RSM.
You can learn about the repeater status from LED indicators. For details, see 5
错误
!
书签自引用无效。
.

The RSM is optional.

Use the RSM specified by Hytera.

PTT TX Channel Type
and
TX Contact Name
are configured by the dealer.

The repeater gives no indication or response if it detects no TX contact name on the current channel (digital
or hybrid) after
PTT
is pressed.