12
6.3 Selecting a Zone
A zone is a group of channels exhibiting the same property, which is programmed by your dealer
and can facilitate convenient management over the channel. The radio supports up to 64 zones, each
with a maximum of 16 channels. You may select a zone through any of the following methods:
Via the menu: Go to the menu “Zone”, then use the Up/Down key to select the appropriate zone
and press the OK key to confirm.
Via the programmable key: You may quickly toggle to the appropriate zone by pressing the
programmed Zone Up or Zone Down key.
6.4 Selecting a Channel
Press the Volume Control/Channel Selector knob to switch the radio to channel selection mode (the
radio displays the icon
), and then rotate the knob to select the appropriate channel. You can also
switch to the designated channel by pressing the programmed Preset Channel key preset by your
dealer.
If the Channel Notify feature is enabled, you will hear the corresponding channel number when switching
to any channel.
6.5 Inputting via Keypad
You can input alias, call numbers and messages via the keypad on the palm microphone.
To switch input method:
To Next Page
Loading...
Need help?
General
