15
Note:
If both the Private Call Manual Dial and Group Call Manual Dial are available, you can press
to switch between the two dialing methods, and the radio will display the call type (private
call ID/ group call ID).
If the Default Numeric Key Selection feature is enabled by your dealer, you can enter a private call
number in the home screen, and then press the PTT key to transmit the call. However, if the
DTMF keypad is enabled, the number entered in the home screen is a phone number. You can
dial the private call number through the menu “Manual Dial” only.
7.1.2 Receiving and Responding to a Private Call
After receiving a private call, the radio will display the icon , then you can listen without any
operation.
You can hold down the PTT key to call back within the preset time. If you do not respond to it, the
radio will provide appropriate indications.
7.2 Group Call
7.2.1
Initiating a Group Call
When initiating a group call, the radio will display the icon . You can make a group call through the
following ways and the operation is similar to Initiating a Private Call.
Preset Contact
In the home screen, hold down the PTT key on the palm microphone to initiate a Group Call to the Group
Call contact preset for the current channel.
Contact List
Step 1 Go to “Menu -> Contact -> Contact List”.
Step 2 Use the Up/Down key to select an appropriate contact.
Step 3 Hold down the PTT key to initiate a Group Call.
Manual Dial
Step 1 Go to “Menu -> Contact -> Manual Dial”).
Step 2 Input a Group Call number you want to call via the keypad.
Step 3 Hold down the PTT key to initiate a Group Call.
To Next Page
Loading...
Need help?
General
