Hytera PD78XG System Planner

Hytera DMR System Planner
93
appropriate indications.
Group Call
You may transmit a Group Call through any of the following methods.
1. Transmitting a call to the preset contact
In the home screen, hold down the PTT key to transmit a Group Call to the Group
Call contact preset for the current channel.
2. Transmitting a call through Contact List
3. Through manual input
After a Group Call is received, hold down the PTT key within the preset time period
to call back.
All Call
Two methods are available for transmitting an All Call: transmitting a call to the
preset contact; transmitting a call through Contact List. Please note that you cannot
respond to an All Call.
Calls on Analog Channels
To transmit a call, hold down the PTT key and speak into the microphone. To receive,
release the PTT key.
Status Indication
The top LED indicator will help you easily identify the current radio status described
below:
LED Indication Radio Status
LED flashes green. Powering on
LED glows red. Transmitting
LED glows green. Receiving
LED flashes orange slowly. Scanning
LED flashes orange rapidly. Emergency
LED glows orange.
After voice communication ends, you can
hold down the PTT key to talk while the
LED is glowing orange.
In addition, the radio status can also be identified via the alert tones, which can be
customized via the CPS. For the display model, related status indication will also be
displayed on the LCD.

Hytera PD78XG Specifications

General

Brand	Hytera
Model	PD78XG
Category	Portable Radio
Language	English