Hytera DMR System Planner
94
Menu
Besides key operations, you can also set and operate the radio via the menu. The
menu in our radio mainly includes the following items:
Contact List
Text Message
Call Logs
Scan
Zone
Settings
Accessories
For details, please refer to the corresponding owner’s manual.
Numeric Keypad
The display model is designed with a numeric keypad, allowing the user to dial
numbers and edit messages. However, the non-display model is not designed with
any numeric keypad.
Auxiliary Features
The radio can be programmed via the CPS to provide various auxiliary features
such as Radio Check, Remote Monitor, Radio Enable and Radio Disable.
Accessory
A GPS module can be integrated into the antenna of the radio, to provide the
positioning service. Via a third-party software, the radio with the GPS module can be
positioned. The radio can work with an antenna with or without the GPS module.
GPIO Port
The radio has a 16-pin GPIO interface, which supports various features. This
interface can be used to connect the earpiece, to receive calls and to collect the
audio signals via the microphone on the earpiece for transmission. In addition, it can
be used to connect the PC via a USB cable, to program the radio. The pins of the
GPIO interface can be programmed to realize features such as Telemetry and
Unmute.
Programmable Features for GPIO Port
For the portable radio, only PIN11 can be programmed with the following features:
No. Programmable Feature Description
1 Telemetry VIO1 This pin is set to Telemetry VIO1.
2 Speaker Open Detect
The pin will output an active level when the speaker is
detected unmuted.
To Next Page
Loading...
Need help?
General
