Hytera PNC360S User Manual

14
3. Press the Navigation key to select an available network from the WLAN list.
4. Press the OK/Menu key.
If a password is required, enter the password, press the
Navigation
key to select
Done
, and then press the
OK/Menu
key twice.
The radio saves WLAN information upon successful connection.
4.1.3 Hotspot
After connecting the radio to the cellular network, you can create a hotspot to offer internet connection to other
devices.
1. Press the Navigation key to select More, and then press the OK/Menu key.
2. Press the Navigation key to select Tethering & portable hotspot, and then press the OK/Menu key.
3. Press the OK/Menu key to enable Portable WLAN hotspot.
4. Specify Network name, Security, and Password.
4.1.4 BT
The BT feature allows you to transmit voice through wireless earpiece or wireless ring PTT.
Pairing with a BT Device
1. Press the Navigation key to select BT, and then press the OK/Menu key.
2. Press the OK/Menu key to enable BT.
3. Press the Navigation key to select the device from the Available devices list.
4. Press the OK/Menu key.
The Pair with xxx? dialog box appears. xxx indicates the BT device name.
5. Press the OK/Menu key again to pair with the device.
Disconnecting from a BT Device
Press the
Navigation
key to select the device from the
Paired devices
list, and then press the
OK/Menu
key
twice to disconnect from the device.
Modifying a BT Device Name
After BT is enabled, the device name is the model by default.

Hytera PNC360S Specifications

General

Brand	Hytera
Model	PNC360S
Category	Radio
Language	English