Hytera PNC360S - Battery

17
The
Clear cached data?
dialog box appears.
3. Press the OK/Menu key.
4.2.4 Battery
Viewing the Battery Power
You can view the proportion of remaining battery power and the power usage of applications.
1. Press the Navigation key to select Battery, and then press the OK/Menu key.
The remaining battery power is shown.
2. Press the Navigation key to select Battery usage, and then press the OK/Menu key.
The power usage of applications is shown.
Enabling the Battery Saver Mode
1. Press the Navigation key to select Battery, and then press the OK/Menu key.
2. Do either of the following:
 To enable Battery Saver mode manually, press the Navigation key to select Battery saver, and then
press the OK/Menu key.
 To allow the radio to enable Battery Saver mode automatically, press the Navigation key to select
Power saving mode is on, press the OK/Menu key, select the criterion to trigger Battery Saver mode,
and then press the OK/Menu key.
4.2.5 Memory
Press the Navigation key to select Memory, and then press the OK/Menu key.
You can view the occupied memory of running applications.
4.2.6 Location
The Location feature allows the radio to obtain its location information through WLAN, cellular network, or GPS.
The location-related application such as Hytera HyTalk can access the location data of the radio.
Setting the Location Mode
1. Press the Navigation key to select Location, and then press the OK/Menu key.