Hytera PNC360S - System; Factory Data Reset

18
2. Press the OK/Menu key to enable Location.
3. Press the Navigation key to select Mode, and then press the OK/Menu key.
4. Select one of the following location modes:
 High accuracy: The radio locates accurately through GPS, WLAN, and cellular network.
 Battery saving: The radio locates only through WLAN and cellular network, so as to save battery
power.
 Device only: The radio locates only through GPS without using data traffic.
5. Press the OK/Menu key.
Setting the Scanning Mode
1. Enable Location. For details, see Setting the Location Mode.
2. Press the Navigation key to select Scanning, and then press the OK/Menu key.
3. Select whether to enable the following scanning modes:
 WLAN scanning: Improve location by allowing system applications and service to detect WLAN
network at any time.
 BT scanning: Improve location by allowing system applications and service to detect BT devices at any
time.
4.3 System
4.3.1 Language
1. Press the Navigation key to select Languages, and then press the OK/Menu key.
2. Press the Navigation key to select the display language, and then press the OK/Menu key.
4.3.2 Factory Data Reset

The Factory Data Reset feature will erase all information on the radio such as personal information and
downloaded applications.

Ensure that the battery power is above 50% before factory reset.
When the radio runs slowly or the applications quit unexpectedly, you can reset the radio to the factory settings to
fix the problem.