31
8.4.2 Setting the Threshold
The microphone threshold is classified into external and internal microphone threshold. After the VOX feature is
enabled, VOX will be triggered when the external or internal microphone detects that the voice volume reaches the
threshold.
To set the threshold, go to VOX > Mic Threshold, select External or Internal, and then press the Left or Right
key.
8.4.3 Selecting a Microphone
You can select which microphone to output voice for VOX.
External: The voice received by the external microphone will be used as the input source for VOX.
Ext First: When the external and internal microphones receive voice simultaneously, the voice received by the
external microphone will be used in preference as the input source for VOX.
To select the microphone, go to VOX > Mic Selection, and then select External or Ext First.
8.5 Talkgroup
The talkgroup includes static group, dynamic group, default group, and home group. These groups can be arranged
in the group folder, selected folder, and scan list for easy management.
8.5.1 Folder Type
Type Description
Normal folder
You can add static and dynamic groups to the normal folder for unified management.
The normal folder can be set to the selected folder, but cannot be set to the scan list.
Dynamic folder It contains dynamic groups.
folder
It contains default groups. You can add groups to which you will initiate calls or send
messages to the folder.
Only one selected folder is allowed.
Scan list
It contains groups to be scanned. Only static groups can be added to the folder.
The terminal can have one or more scan lists. However, only one scan list will be active
at the same time.
list
It contains all dynamic groups (excluding dynamic background groups) that are involved in
scanning.
Background
folder
It contains background groups. The folder, which can only be configured and managed by
your dealer, is invisible to terminal users.
To Next Page
