7
Optional Accessories
The following items are the main optional accessories for the repeater, and please consult your local dealer for more
information of other accessories.
Caution: Use the accessories specified by the Company only. If not, Hytera shall not be liable for
any loss or damage arising out of use of unauthorized accessories.
Care and Cleaning
To guarantee optimal performance as well as a long
service life of the product, please follow the tips below.
Product Care
●
Keep the product at a place of good ventilation and
heat dissipation to facilitate normal work.
●
Do not place irrelevant articles on top of the product
to ensure optimal heat dissipation.
●
Do not pierce or scrape the product.
●
Keep the product far away from substances that can
corrode the circuit.
●
Do not place the product in corrosive agents,
solutions or water.
Product Cleaning
Caution: Be sure to power off the
product before cleaning.
●
Remove the dust and ne particles on the repeater
surface with a clean and dry lint-free cloth or a brush
regularly.
●
Use a non-woven fabric with neutral cleanser to
clean the keys, control knobs, LCD and jacks after
long-time use. Do not use chemical preparations
such as stain removers, alcohol, sprays or oil
preparations. Make sure the product is completely
dry before use.
Remote Speaker Microphone
SM18A1
Backpack
NCN010
Outdoor Backpack Power Supply
Management System PV3001
(Internal Battery: BL9901)
Multi-functional Bracket
BRK17
Vehicle Antenna
Duplexer (Frequency: 136-174MHz; RX-TX spacing: 5MHz)
Duplexer (Frequency: 350-400MHz; RX-TX spacing: 10MHz)
Duplexer (Frequency: 400-470MHz; RX-TX spacing: 10MHz)